Add Character, Style and Beauty to your Home - the easy way  Decorative window shutters can give your home the finishing touch of elegance and distinction in just a few hours, at an affordable price. "All size" shutters give the beauty of wood but without the maintenance. Made from DurapreneTM a hi-tech co-polymer material means that they will not chip, crack, peel, blister or rot having been tested over many years in the extreme climates of the USA and Canada. Our shutters will fit your window size - made to measure in length with 5 standard widths and various combinations of double widths to chose from. Design options offer cathedral or straight tops, with or without centre (i.e.. all louvres) and even two-tone - i.e.. coloured frames with different coloured louvres. Easy to install using shutter spikes supplied and general household tools - a home can have a new look in just a few hours.  Maintenance Free  Any length  Many widths  Open Louvres  Popular colours  Choice of design

Mounting Instructions On Masonry, Brick, Cinderblock, etc.     1:- Place shutter in desired position. Mark locations for 6 holes approx 1.5" (38mm) from top and bottom and in line at the centre.     2:- Lay shutter face up and drill a 3/8th" (9.5mm) hole through the rail at each mark Re-position shutter in the desired position and using a punch or other suitable marker, mark the mounting hole location on the building 3:- Remove shutter and at the marks drill a 9/32"(7mm) diameter hole into the wall at least 1 3/4"(45mm) deep Place shutter back in the desired position. Put shutter spike in hole. Using a hammer gently tap the spike in part way. Repeat until all 6 spikes are started then finish tapping them all in.   4:- BE CAREFUL NOT TO TAP THEM IN TOO FAR They should only go in far enough for the underside of the shutter spike head to touch the shutter when the back edge of the shutter is touching the building. Shutters can be easily cleaned with mild dish soap and water to maintain their lustre.   The Fixing Spike System supplied makes installation fast and easy with no screws, anchors or wall plugs necessary. It holds in wood, aluminium, stucco brick or masonry / concrete. Matches colour of shutters.   Prices and online ordering Click Here Visit our design centre Click Here

6 popular colours - White- Black -Grey- Sienna Brown- Pine Green and Brick Red ( Terracotta). Two Tone effect can be created with different coloured frames and Louvres "Mix n Match" Paintable Shutters are available if you prefer to match a specific colour Black                           Grey                         Green Brown                       Brick Red                      Mixed

We are happy to take your order by phone, please call 0870 421 5722     10 lines.